When devices in the VRRP group use the same priority:
If the VRRP master and slave are determined, the VRRP status is not negotiated again.
If two masters exist before devices in the VRRP group exchange heartbeat packets, the VRRP status is negotiated as follows:
If the source IP address of a received heartbeat packet on the local end is larger than the primary IP address of the interface, the local device switches to the Backup state. Otherwise, the local end discards the heartbeat packet and retains in Master state.
To set alarm severity on a WLAN device, run the alarm-name alarm-name severity severity command in the alarm management view.
Run the undo alarm-name severity command to restore the alarm severity to the default setting.
【Product�?
ManageOne ServiceCenter
【Version�?
3.0.9
【Question�?
How can I set a ServiceCenter security group rule to deny?
【Answer�?
A security group can only be configured with a whitelist (allowing access from a network segment) and cannot be denied (denying access from a network segment).
----End
If you have more questions, you can seek help from following ways:
