How can I change the camera name on the VCN500?

Common operations for managing APs 1. Log in to an AC and change an AP's login user name and password. - V200R005: [HUAWEI] wlan [HUAWEI-wlan-view] wlan ap username huawei password cipher Enter the password (plain-text password of 8-32 characters or cipher-text password of 32 or 56 characters): Confirm password: [HUAWEI-wlan-view] commit ap 1 //Run the display ap command to obtain the AP ID if you forget the AP's login password. Warning: Committing configuration may cause service interruption, continue?[Y/N] :y To restore the default user name and password, run the undo wlan ap username command. By default, the user name is admin and password is admin@huawei.com. - V200R006: [HUAWEI] wlan [HUAWEI-wlan-view] ap-reset ap-id 1 Enter the password (plain-text password of 8-32 characters or cipher-text password of 48 or 68 characters): Confirm password: To restore the default user name and password, run the undo ap username command. By default, the user name is admin and password is admin@huawei.com. 2. Restart an AP. - V200R005: [HUAWEI] wlan [HUAWEI-wlan-view] ap-reset id 1 Warning: Reset AP, continue?[Y/N]:y Operation on the web platform: Choose Configuration > AP Management > AP Information. Select an AP and click Restart. - V200R006: [HUAWEI] wlan [HUAWEI-wlan-view] ap-reset ap-id 1 Warning: Reset AP, continue?[Y/N]:y Operation on the web platform: Choose Maintenance > AP Maintenance > AP Restart. Select an AP and click Restart. 3. Restore factory settings. - V200R005: Run the ap-manufacturer-config id ap-id command to restore factory settings of an AP. - V200R005: Run the ap manufacturer-config { ap-name ap-name | ap-mac ap-mac | ap-id ap-id } command to restore factory settings of an AP. 4. Change the AP name. - V200R005: [HUAWEI-wlan-view] ap id 1 [HUAWEI-wlan-ap-1] ap-sysname ap_01 Operation on the web platform: Choose Configuration > AP Management > AP Information. Click the icon of a specific AP and change the AP name. - V200R006: [HUAWEI-wlan-view] ap-rename ap-name N1-2 new-name N2-2 Operation on the web platform: Choose Configuration > AP Configuration > AP Information. Click the name of a specific AP and change the AP name. 5. Delete an AP. - V200R005: [HUAWEI-wlan-view] undo ap id xx Operation on the web platform: Choose Configuration > AP Management > AP Information. Select an AP and click Delete. If ACs work in active/standby mode, you are advised to disconnect the AP and delete the AP from both the active and standby ACs. - V200R006: [AC6605-wlan-view] undo ap-id xx Operation on the web platform: Choose Configuration > AP Configuration > AP Information. Select an AP and click Delete. If ACs work in active/standby mode, you are advised to disconnect the AP and delete the AP from both the active and standby ACs. 6. IP addresses of APs cannot be modified on an AC.

You can add cameras one by one or in batches using a wizard or on the device management tab page. The VCN3000 supports cameras that comply with the HWSDK, HIKSDK, DHSDK, AXISSDK, ONVIF, TEYES, or GB/T 28181 protocol. For details about how to add cameras to the VCN3000, see the eSpace VCN3000 Product Documentation. Visit the Huawei Enterprise Technical Support website and download the eSpace VCN3000 Product Documentation of the required version.

Camera grounding includes video grounding and power grounding. Video grounding: Terminals such as DVR or matrix are used for indirect grounding. It is recommended that video grounding be completed on the local camera if videos are transferred through a video transfer device such as an optical transceiver. Power grounding: The ground terminals of the AC and DC power supplies need to be grounded when a centralized power supply mode is used, for example, switch-mode power supply (SMPS). Grounding standards: For the insulated copper-conductor cables used as ground cables as well as the power cables, their minimum cross-sectional area must be 6 square millimeters, minimum buried depth must be 0.5 m, and ground resistance must be smaller than 4 ohms.