Connector of the AC power cable


Connector of the AC power cable on the MA5616: PI straight male connector (type 1) and C13 straight female connector (type 2)

Other related questions:
Cables of the Console Interface on an AR
The console cable is used to connect the RJ45 connector of the console interface and DB9 connector of the serial interface of the PC.

What's the power cable Requirements for AC/DC power distribution
The conductor in the neutral wire must have the same cross-sectional area as the conductor in the live wire. The DC power feeder should be selected based on the long-term load. If the cross-sectional area exceeds 95 mm2, a hard bus cable should be used. If there is a great difference between the short-term load and the long-term load, cables can be routed by stage. AC/DC conducting wires should be flame-retardant and be routed according to the Code for fire protection design of tall buildings (GB50045-95). Low voltage power distribution rooms should be designed and configured according to the Code for low voltage distribution and circuit design (GBJ54-83).

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top