Connection of the AC power cable on the MA5616

6

One end of the AC power cable is connected to the AC power supply input port of the cabinet, and the other end is connected to the AC power supply output port.

Other related questions:
What's the power cable Requirements for AC/DC power distribution
The conductor in the neutral wire must have the same cross-sectional area as the conductor in the live wire. The DC power feeder should be selected based on the long-term load. If the cross-sectional area exceeds 95 mm2, a hard bus cable should be used. If there is a great difference between the short-term load and the long-term load, cables can be routed by stage. AC/DC conducting wires should be flame-retardant and be routed according to the Code for fire protection design of tall buildings (GB50045-95). Low voltage power distribution rooms should be designed and configured according to the Code for low voltage distribution and circuit design (GBJ54-83).

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top