Diameter of the AC power cable


Cross-sectional area of the AC power cable on the MA5616: 1.0 mm2

Other related questions:
What's the power cable Requirements for AC/DC power distribution
The conductor in the neutral wire must have the same cross-sectional area as the conductor in the live wire. The DC power feeder should be selected based on the long-term load. If the cross-sectional area exceeds 95 mm2, a hard bus cable should be used. If there is a great difference between the short-term load and the long-term load, cables can be routed by stage. AC/DC conducting wires should be flame-retardant and be routed according to the Code for fire protection design of tall buildings (GB50045-95). Low voltage power distribution rooms should be designed and configured according to the Code for low voltage distribution and circuit design (GBJ54-83).

What types of AC power cables are applicable to CE8800&CE7800&CE6800&CE5800 switches
CE8800&CE7800&CE6800&CE5800 switches can receive AC power from country-specific power sockets or C13 straight female sockets. In the first mode, the switches need to use country-specific AC power cables. In the second mode, the switches need to use AC power cables with a C13 straight female connector at one end and a C14 straight male connector at the other end.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top