Does the router support user level settings using RADIUS


Yes, the router can set user levels using RADIUS. The configuration effect is the same as the local user level configuration during AAA local authentication.

You can set the user levels on the RADIUS server.

Other related questions:
Does a router support user level configuration through a RADIUS server and how it is implemented
The router supports user level configuration through a RADIUS server, and the configuration result is the same as that configured in local AAA authentication. Configuration must be performed on the RADIUS server.

Why can a user use commands higher than level 1 after the user level configured on the RADIUS server for the user is set to level 1
Run the display current-configuration command to check the configuration on the router and check whether the command line level has been changed by running the command-privilege level command.

How many user levels does an AR router support
An AR router supports user levels 0-15. The value 0 indicates the visit level, value 1 indicates the user level, value 2 indicates the configuration level, values 3 to 15 indicate the management level.

How to set the command level in the specified view
The procedure for setting the command level in the specified view is as follows: Command format: command-privilege level < level > view < view-name > < command-key > To adjust the command level, see the following examples: Example 1: Set the level of the save command to 5. [Huawei] command-privilege level 5 view user save Example 2: Adjust the permission of the configuration file to a lower-level command. [Huawei]command-privilege level 2 view system display current-configuration The system grants different command levels. Each command in each view has a specified level. The administrator can change the command level based on user requirements to enable a lower-level user to use some high-level commands, or raise the command level to improve device security. It is recommended that the default command level be not changed without permission.

Can the user level be configured through RADIUS
User levels can be configured on the AR through RADIUS. This configuration mode is the same as the mode in which levels of local users are configured during AAA local authentication. The user level needs to be configured on the RADIUS server.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top