Homepage FAQ Telepresence and Video Conferencing

Whether the Huawei ViewPoint 8000 series endpoint can be connected to IP cameras

The Huawei ViewPoint 8000 series endpoint cannot be connected to IPCs.
IPCs are digital video cameras. The digital video signals are transmitted through network cables. The Huawei 8000 series endpoint can only receive analog signals through video ports.

Other related questions:

Introduction to specifications of the Huawei ViewPoint 8000 series endpoint

For details about specifications of the ViewPoint 8000 series endpoint, visit the ViewPoint 8000 series endpoint.

Whether the Huawei ViewPoint 8000 series endpoint supports image inversion

You cannot set image inversion on the Huawei ViewPoint 8000 series endpoint. You need to adjust the image on the camera. For example, turn the Flip switch to ON on the back of the SONY D70 camera, the displayed image is inverted.

Which ports must the cameras have to connect to the Huawei ViewPoint 8000 series endpoint?

The Huawei ViewPoint 8000 series endpoint supports the cameras with a variety of ports. The only exception is the SXGA port, which cannot go with the video input port. Besides, do not use transfer cables (such as the S-Video-to-CVBS cable); otherwise, the video is displayed in black and white.

What is the default IP address of the Huawei ViewPoint 8000 series endpoint

The default (factory setting) IP address of a Huawei ViewPoint 8000 series endpoint is 192.168.1.1 or 10.76.167.31.

Whether the VGA ports of the Huawei ViewPoint 8000 series endpoint can deliver camera video

The VGA ports of the Huawei ViewPoint 8000 series endpoint cannot deliver video but the presentation only.