How do I configure the other DVI input port of the ViewPoint 9050 as the video source?

There are two methods of entering system configurations: 1. Importing a configuration file Subsequent system configurations will be automatically input as required based on the configuration file, simplifying the configuration process and reducing the time needed for configuration. This method is commonly used for the second deployment where the configuration file of the first deployment must be used. 2. Manually entering system configurations All system configurations must be manually entered. This method applies to initial deployment.

The DVI-I port on the Huawei ViewPoint 9000 series endpoint can be connected to the DVI-D cable. The DVI-I port supports DVI-I and DVI-D signals.

The output mode of the HD OUT 1 port is not set correctly. From the remote controlled UI, choose Settings > Video > Video Output > HD OUT 1 and set Output mode to VGA

If the audio output port of the gooseneck microphone is of the same type as the audio input port of the ViewPoint 9039S, the two ports can be connected. If the two ports are of different types, connect them through the tuning console.

To set the SD input port to the CVBS mode for the ViewPoint 9039S, perform the following operations: 1. Log in to the web interface, choose Device Control > Monitoring Video, and set Input Source to SD IN. 2. Choose System Settings > Input/Output, click the Video Input tab, and select the CVBS mode for the SD IN video input source. The ViewPoint 9030 does not support SD input.