Homepage FAQ Telepresence and Video Conferencing

What parameters need to be set if a ViewPoint 9030 needs to place point-to-point SIP calls to Cisco endpoints?

During interconnection between a Huawei endpoint and a device provided by a vendor, both parties must comply with industry communication standards. However, whether the communication is available depends on actual test results. If you have interconnection test requirements, contact the local office of Huawei.

Other related questions:

How can I understand call logs displayed in the scenario where a point-to-point call converts into a multipoint conference?

For details, see .

How do I initiate a point-to-point conference on the DP300?

On the Call screen of the DP300, you can place a call to a remote site to set up a point-to-point conference. For details, see 6.1 Initiating a Point-to-Point Conference.

Are chair control rights available in point-to-point conference?

Point-to-point conferences have no chair site. You cannot set conference control functions for the chair site.

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

What parameters need to be set if a ViewPoint 9030 needs to place point-to-point SIP calls to Cisco endpoints?

Other related questions:

If you have more questions, you can seek help from following ways: