Got it

What should I do if a delivered VP9000 series MCU hos no ESN?

108

If a delivered VP9000 series MCU does not have an ESN, you can run a command to generate one as follows:
1. On the MCU web interface, choose Setting > System Status > License and check whether the ESN of the MCU is empty.
2. Log in to the MCU main control board as the administrator user and run the display esn command to check the ESN of the MCU.
ESN Read fail!
dis manufacture-info
Slot 0:
ECCC:
board type : ECCC
make SN :
3. If no ESN is displayed, run the emtest esn esnwrite command to generate one.

Other related questions:
Can the VP9000 series MCU be added on the SMC1.0?
Only the ViewPoint 8000 series MCU can be added on the SMC1.0.
How many automatic continuous presence modes do the VP9000 series MCU have?
The VP9000 series MCU supports seven automatic continuous presence modes. They are 1-pane, 2-pane, 3-pane, 4-pane, 5-pane, 6-pane, and 8-pane. The 7-pane mode is not supported because its display effect is not good.
What settings should be performed if I want to use the web interface of a VP9000 series MCU to hold conferences?
You can hold conferences on the web interfaces of the VP9630 and VP9650. The settings are as follows: Log in to the web interface of the VP9630 or VP9650, choose Setting > System > Connection Management, and set Connection type to Built-in web/Third-party. The web interface of VP9660 does not support conference scheduling. The VP9660 must work with the SMC2.0 to hold conferences.
If you have more questions, you can seek help from following ways:
To WeiKnow To Live Chat

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.