How can I register the ViewPoint 8650 with the GK?

To add route information for the ViewPoint 8650 GE1 port, perform the following operations: 1. Log in to the ViewPoint 8650 server. 2. Run the sys route add 192.168.1.1 255.255.255.0 2 command to add route information for the GE1 port. Notes: 1. The command may vary according to MCU versions. You can run the sys route command and press Enter to view the specific command. 2. For the ViewPoint 8660, run the system-view route command and press Enter to view the specific command.

The ESN cannot be queried in the BootROM system of the ViewPoint 8650 MCU.

No, you do not. You only need to add participants and correctly set related parameters.

The precautions for upgrading the ViewPoint 8650 are as follows: The MCU can be directly degraded without any intermediate version. When upgrading the MCU from a version earlier than train 11 to a later version, you must first upgrade to train 11, that is, MCU V100R003C03B016SP04 (Release 3.3.16.4 2009.12.28).

1. Capacity expansion involves participant capacity, conference IP resources, continuous presence resources, and adaptation resources for software and hardware. You must expand capacities for the software and hardware at the same time; otherwise, the MCU will generate an alarm. Hardware capacity expansion is to add GPUA service boards or HDPX high-density daughter boards, and software capacity expansion mainly involves license capacity expansion. 2. To expand capacity, contact technical support engineers of local Huawei offices to have them calculate hardware resources required for corresponding license resources using the quotation template. Then add required hardware resources. You also need to sign a capacity expansion contract with the local office or an agent before capacity expansion.