Homepage FAQ Telepresence and Video Conferencing

How can I disable the MCU web login function in CLI mode?

223

To disable the MCU web login function in CLI mode, perform the following operations:
Log in to the MCU main control board in Telnet or SSH2 mode (the user name and password are admin and admin or admin and Change_Me). Access the system configuration interface. Then, run the following commands:
sys
[HUAWEI VP9630]telnet-config
[HUAWEI VP9630-Telnet]enable-
enable-http enable-logon enable-network-login enable-security-mode //Set enable-http to 0 to disable the web login function.
[HUAWEI VP9630-Telnet]enable-network-login
enable-network-login
[HUAWEI VP9630-Telnet]enable-network-login
- mode{0:only enable FE0, 1:only enable GE0, 2:only enable GE1 3:enable all interface, default:3}
//For security purposes, you may need to disable some ports.

Other related questions:

Method used to disable the interface access function for the USG6000 series on the CLI

The following example is provided for you to disable the interface login for the USG6000 series on the CLI: # On GigabitEthernet 1/0/1, configure to prohibit the administrator from accessing the device using HTTP. system-view [sysname] interface GigabitEthernet 1/0/1 [sysname-GigabitEthernet1/0/1] service-manage http deny This configuration has a higher priority than security policies. After the configuration completes, even you are allowed to access the local zone from the interface locating security zone, as an administrator, you still cannot log in to the device through the interface.

Can I disable the MCU scheduled restart function?

The function of restarting at midnight is a protection means for the MCU. If no conference is held on the MCU, the MCU will automatically restart at a specified time in the morning every day to release MCU resources and processes for better service. Generally, you are not advised to disable the function. If you still want to disable the function, run the following command: system-view enable-reboot-midnight 0:disable,1:enable

How can I disable the management function of the MCU GE0 port?

Run the system-view telnet-config enable-network-login command to disable the management function of the MCU GE0 port.

How can I prohibit login to the MCU web interface?

Log in to the MCU main control board in Telnet or SSH2 mode (the user name and password are admin and admin or admin and Change_Me). Access the system configuration interface. sys [HUAWEI VP9630]telnet-config [HUAWEI VP9630-Telnet]enable- enable-http enable-logon enable-network-login enable-security-mode [HUAWEI VP9630-Telnet]enable-network-login enable-network-login [HUAWEI VP9630-Telnet]enable-network-login - mode{0:only enable FE0, 1:only enable GE0, 2:only enable GE1 3:enable all interface, default:3} Enable and disable related ports.

How can I disable the restart at midnight function for an MCU?

The restart at midnight function is a protection means for the MCU. If no conference is held on the MCU, the MCU will automatically restart at midnight every day to release MCU resources and processes so that it can properly work. Generally, you are not advised to disable the function. To disable the function, run the following commands: system-view enable-reboot-midnight 0:disable,1:enable

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

How can I disable the MCU web login function in CLI mode?

Other related questions:

If you have more questions, you can seek help from following ways: