Homepage FAQ Telepresence and Video Conferencing

How do I display fixed participants in the continuous presence on the VP9650?

118

In a conference initiated using the MCU, the continuous presence is automatic, and participants in the main and sub panes will change. To fix participants displayed in the main and sub panes, perform the following operations:
1. Log in to the SMC2.0 web interface.
2. Choose Conference > Scheduled Conference and select participants.
3. Click Set Continuous Presence.
4. Select the continuous presence mode, select participants in Scheduled Conference, and drag them into main and sub panes.
5. Click OK.
Note: If the ViewPoint 8000 series MCU is used, you need to configure the continuous presence on the MCU first.

Other related questions:

How do I set continuous presence on the DP300?

The continuous presence function is used to display the video of two or more sites on the same monitor simultaneously. The number of sites whose video is displayed and the video layout vary according to continuous presence modes. For details, see 6.5 Controlling a Conference.

How do I configure participant broadcasting in turn on the SMC2.0?

For details about how to configure participant broadcasting in turn in the continuous presence on the SMC2.0: 1. Log in to Huawei Enterprise Technical Support Website. 2. Enter SMC2.0 in the search box and click the SMC2.0 path displayed below the search box. 3. View section "Presetting Participant Broadcasting in Continuous Presence in Turn" in the production document of the V500R002 or earlier versions.

Does the SMC2.0 support the function of broadcasting continuous presence in turn to the chair participant?

The SMC2.0 does not support the function of broadcasting continuous presence in turn to the chair participant. When continuous presence is broadcast in turn to the chair participant, the participant is watched in a single screen.

How can I configure automatic continuous presence to display my own participant?

To configure automatic continuous presence to display your own participant: Log in to the VP9600 series MCU CLI and run the system-view conf-policy enable-mp-see-self 1 command. // The value 1 indicates that your own participant is displayed, and the value 0 indicates that your own participant is not displayed. Enter save to save the configuration.

Can an E1 line participant be added to the asymmetric continuous presence layout of the MCU?

The E1 line participant cannot be added to the asymmetric continuous presence layout of the MCU.

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

How do I display fixed participants in the continuous presence on the VP9650?

Other related questions:

If you have more questions, you can seek help from following ways: