How do I modify the system time of the MCU?

To change the system time of a standalone SC, run the date command. For example, to change the system time to UTC time 2014-09-03 17:57, run the date 20140903175700 command.

To modify common system configuration items on the SC, perform the following operations: 1. Run the system-view command to enter the system view. 2. Run the common-config command. [admin-password-expire] set when the admin password to pass its expiry date <1 - 365> [auth-failure-lock] whether to lock an endpoint for its authentication failure {true|false} [system-name] config the system name [log-level] config the log level {ERROR|WARN|INFO|DEBUG} [enable-unknown-call] config whether permit unknown call {true|false} [reg-alias-restriction] config alias restriction {none|black|white} [syslog-addr] config the Syslog server ip address [enable-proxy] config whether enable the proxy {true|false} [lack-bandwidth-policy] config the policy when lack of bandwidth {reject|reduce} [ssh-lock-time] config the SSH lock time(min) <5 - 180> [force-route] configure how to use H.323 signal route {auto|force|none} [security-mode] config security mode {true|false} [enable-online-notify] enable the function of noline notify {true|false} [enable-sslv3] to enable or disable SSLV3 {true|false} [enable-zone-media-route-default] enable the default value of media route of zone {true|false} [push-spec-service-conf] config whether to push special service conferences to a terminal calling the special service conference number {true|false} [use-zone-service-address-SIP-EP] whether a SIP endpoint uses the service address of its zone {true|false} [esdk-same-name-max-num] config the maximum number of the same esdk user name <1 - 1000> 3. Log in to Huawei Enterprise Technical Support Website. 4. Enter SMC2.0 in the search box and click the SMC2.0 path displayed below the search box. 5. Find the SC Command Reference Guide of the corresponding version.

On the home screen, choose Apps > Preferences > Call Settings > Auto Dial. Press Enable. The Dial After field is displayed. Enter a value. Press Done.