Why does server check fail when RADIUS dynamic authorization is used on an AR

6

The RADIUS server address is not configured on the AR.

Other related questions:
Why does the server checking error occur during RADIUS dynamic authentication
This error occurs because the RADIUS authentication server is not configured properly.

Why does RADIUS authentication fail when the RADIUS server template and RADIUS server are properly configured
This problem has the following possible causes: -The IP address of the router (a RADIUS client) is not configured on the RADIUS server, so the RADIUS server cannot send an authentication response packet to the router. -Different shared keys are configured on the router and the RADIUS server.

Why does authentication fail when the RADIUS server template is correct and the AAA authentication mode is RADIUS
The possible causes are as follows: 1. The client's IP address is not configured on the server, the IP address is configured incorrectly, and the RADIUS server does not respond to authentication packets. 2. The shared keys on the AR and RADIUS server are different. 3. The user configuration of the RADIUS server is incorrect.

Why does HWTACACS authentication fail when non-authorization is configured on the switch
When an HWTACACS server template is configured, the authorization server must be specified for the switch even if non-authorization is configured. Otherwise, HWTACACS authentication fails.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top