How do I configure the administrator level on an AR

0

If non-authentication is used, the administrator level is specified by using the user privilege level command in the VTY interface view.
If local authentication is used, the administrator level can be configured in the following ways that are in descending order of priority:
1. Running the local-user privilege level command to configure the local user level
2. Running the admin-user privilege level command to configure the administrator level in a domain
3. Running the user privilege level command to configure the user level in the VTY interface view

If remote authentication is used, the administrator level can be configured in the following ways that are in descending order of priority:
1. Using the user level sent by an authentication server to the AR after authentication has succeeded
2. Running the admin-user privilege level command to configure the administrator level in a domain
3. Running the user privilege level command to configure user level in the VTY interface view

Other related questions:
How to configure the administrator level on the AR
If non-authentication is used, the administrator level is specified by using the user privilege level command in the VTY interface view. If local authentication is used, the administrator level can be set in the following ways that are in descending order of priority: 1. Run the local-user privilege level command to configure the local user level. 2. Run the admin-user privilege level command to configure the administrator level in a domain. 3. Run the user privilege level command to configure the user level in VTY mode. If remote authentication is used, the administrator level can be set in the following ways that are in descending order of priority: 1. Use the user level sent by an authentication server to the AR after authentication is succeessful. 2. Run the admin-user privilege level command to set the administrator level in a domain. 3. Run the user privilege level command to set the user level in VTY mode.

Functions of administrator roles and levels of the USG6000 series
The USG6000 series controls administrator permissions by administrator role and level as follows: - Bind an administrator role: Control administrator permissions based on the menu of the web UI, which mainly applies to web administrators. On the web UI, choose System > Administrator > Administrator, create an administrator, and specify a role for it. Administrators with different roles have different operation permissions. - Specify an administrator level: Control administrator permissions based on the levels of administrator-executable commands, which mainly applies to CLI administrators. The following example is provided for you to set the permission level for an administrator account. # Set the permission of the administrator abc to level 3. system-view [sysname] aaa [sysname-aaa] manager-user abc [sysname-aaa-manager-user-abc] level 3 The administrator role has a higher priority than the administrator level, that is, if an administrator is bound to a role, the level specification no longer takes effect. Even if an administrator account is not bound to a specific role, the administrator role and level have a default mapping as follows: - 1: Monitoring level corresponds to the configuration administrator (monitoring). - 2: Configuration level corresponds to the configuration administrator. - 3: Management level to the 15th level correspond to the system administrator. For more details, see the administrator chapter in the product documentation of the USG6000 series.

Changing the administrator level on the USG6000
Change the administrator level on the USG6000 as follows: HRP_Asystem-view Enter system view, return user view with Ctrl+Z. HRP_A[USG6600-1]aaa HRP_A[USG6600-1-aaa]manager-user admin HRP_A[USG6600-1-aaa-manager-user-admin]level ? INTEGER<0-15> Value //Select a level ranging from 0 to 15 here. HRP_A[USG6600-1-aaa-manager-user-admin]level 15 //This command indicates setting the permission of the admin account to level 15.//

Viewing the administrator level on the USG6000
View the administrator level on the USG6000 as follows: [USG6600]display manager-user username admin 17:47:00 2015/04/21 ---------------------------------------------------------------------------- Username : admin Password : **************** State : Active Service-type : web ftp telnet terminal ssh ACL-number : - Access-limit : No Online-number : 1 User-level : 15 FTP-directory : hda1: Ssh authentication: any Ssh service : stelnet Ssh RSA-key : -

How do I configure a multi-level VU
1. Log in to the web management system of the U1900 series unified gateways as the administrator. 2. Choose System > VU Management > Customized automatic switchboard configuration. 3. Click Create. 4. Click OK. A message indicating the configuration success is displayed. For more details, please refer to the U1900 series unified gateways product documentation.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top