Can physical interfaces be configured as monitored interfaces of a VRRP group on the AR router

1

Physical interfaces can be configured as monitored interfaces of a VRRP group on the AR router.

Other related questions:
Can physical interfaces be configured as monitored interfaces of a VRRP group
Yes, physical interfaces can be configured as monitored interfaces of a VRRP group.

Can physical interfaces be configured as monitored interfaces of a VRRP group for S series switches
S series switches support association between VRRP and interfaces. Certain physical interfaces can be configured as tracked interfaces of a VRRP group. A maximum of eight tracked interfaces can be configured on a switch.

Example of configuring association between VRRP and the interface status to monitor uplink interfaces on an AR router
An example of configuring association between VRRP and the interface status to monitor uplink interfaces on an AR router is as follows: Associate VRRP with the interface status to detect faults of uplink interfaces and switch over between the master and backup gateways. For details about the configuration, see the URL: Example for Configuring Association Between VRRP and the Interface Status.

How to configure interface groups on AR routers
If users need to perform the same configuration on multiple Ethernet interfaces, they can add the Ethernet interfaces into an interface group. Users only need to run the configuration command of a function once in an inteface group view to configure the function for all Ethernet interfaces included in the interface group. In this way, interfaces can be configured in batches and repeated configurations are reduced. Interfaces can be added into two types of interface groups: permanent interface groups and temporary interface groups, which have the same function. However, a temporary group is automatically deleted by the system after you quit the view of the temporary interface group. Configure a permanent interface group as follows: [Huawei] port-group portgroup1 [Huawei-port-group-portgroup1] group-member ethernet2/0/0 to ethernet2/0/1 //Add interface Eth2/0/0 and interface Eth2/0/1 to the interface group portgroup1. Configure a temporary interface group as follows: [Huawei] port-group group-member ethernet2/0/0 to ethernet2/0/1 //Add interface Eth2/0/0 and interface Eth2/0/1 to a temporary interface group. AR550 series products do not support interface groups.

Can the E1 interface of an AR router interconnect with MP-group interfaces
The E1 interface of an AR router cannot interconnect with MP-group interfaces. The network works properly only when the configurations of the interfaces on both interconnected ends are consistent.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top