How can I configure SIP on TE20?

SIP ports are used for stack connections, so DAD cannot be configured on such ports.

To modify SIP configuration items on the SC, perform the following operations: 1. Run the system-view command to enter the system view. 2. Run the sip-config command. [udp] enable the udp protocol {true|false} [udp-port] config the singal udp port <1024 - 65535> [tcp] enable the tcp protocol {true|false} [tcp-port] config the singal tcp port <1024 - 65535> [tls] enable the tls protocol {true|false} [tls-port] config the singal tls port <1024 - 65535> [sip-server] enable the sip server {true|false} [reg-refresh-time] config the register refresh time <30 - 3600> [min-session-expire] config the minimum session expire <90 - 3600> [contact-modify] enable the modification of the contact address {true|false} [turn-server] enable the turn server {true|false} [traversal-server-tcp-port] the tcp port of traversal server <1024 - 65535> [traversal-server-tls-port] the tls port of traversal server <1024 - 65535> [traversal-server] enable the traversal server {true|false} [online-push-interval] the time of online push intervalue <10 - 3600> [enable-call-refresh] enable call refresh equal as reg refresh(design for e20) {true|false} [turn-server-user-name] the user name of turn server [turn-server-password] the password of turn server 3. Log in to Huawei Enterprise Technical Support Website. 4. Enter SMC2.0 in the search box and click the SMC2.0 path displayed below the search box. 5. Find the SC Command Reference Guide of the corresponding version.

To display SIP configuration items on the SC, perform the following operations: 1. Run the display command to go to the display view. 2. Run the sip-config command to display SIP configuration items. For details, see HUAWEI SMC2.0 V500R002C00 SC Command Reference Guide.

Obtain a TE Mobile SIP account as follows: Obtain the user name and password from the SC server administrator.

You can use either of the following methods to configure SIP on TE10: On the remote control UI: Choose System Settings > SIP and set SIP server parameters. On the web page: Choose System Settings > Network > SIP and set SIP parameters.