How do I configure the TE30?

The following describes the basic configuration procedure, which is for reference only. For the detailed configuration procedure and precautions, see the appropriate configuration guide.
<HUAWEI> system-view
[~HUAWEI] admin
[~HUAWEI-admin] virtual-system vs1      //Create a VS named vs1.
[*HUAWEI-admin-vs:vs1] port-mode group      //Configure vs1 to work in group mode.(VSs can work in group or port mode.)
[*HUAWEI-admin-vs:vs1] assign interface 10GE 1/0/0      //Allocate a physical port to vs1.
Warning: All configurations of the interfaces will be deleted. All interfaces of
 the same group will be assigned. Continue? [Y/N]: y
[*HUAWEI-admin-vs:vs1] quit
[*HUAWEI-admin] commit
[~HUAWEI-admin] display virtual-system
---------------------------------------------
Name                             Status
---------------------------------------------
Admin-VS                         running
vs1                              running
---------------------------------------------
If the status of a VS is running, the VS is created.

Manuals: For details about how to configure the RAID card and precautions, see http://support.huawei.com/enterprise/en/doc/DOC1000004186?idPath=7919749|9856522|21782478|19955021|19961397. Videos: LSI SAS2208 RAID Controller Card Configuration http://support.huawei.com/huaweiconnect/enterprise/thread-243427.html LSI SAS2308 RAID Controller Card Configuration http://support.huawei.com/huaweiconnect/enterprise/thread-243441.html LSI SAS3008 RAID Controller Card Configuration http://support.huawei.com/huaweiconnect/enterprise/thread-281743.html LSI SAS3108 RAID Controller Card Configuration http://support.huawei.com/huaweiconnect/enterprise/thread-281765.html

The SMC2.0 does not support configuration export.