The TE Mobile is automatically deregistered after being shut down

The firewall does not support power-off through the CLI or automatic power-off. Instead, you need to press a button to power it off.

If this function is enabled, the client-side laser of a board will be automatically shut down when the WDM side of the board receives no optical signal.

A permanent conference is held on the RM. If you have scheduled the conference on the MCU and allocated related MCU resources, the held conference is not affected after the computer where the RM resides is shut down. However, if the computer where the RM resides is shut down, you cannot perform conference control operations. It is a high-risk operation to shut down the computer where the RM resides when there are ongoing conferences, and you are not advised to do it.

After being powered off, the TE Mobile is deregistered and becomes offline in the SC. When the TE Mobile is powered on and started again, the TE Mobile can still be used and registered. Similar to VC100, the TE Mobile does not have a software activation license. The TE Mobile functions like an app on a common mobile phone.

1. Before shutting down the U1900 series voice gateway, log in to the device through the CLI and run the save command to save the configuration data. Otherwise, the configuration data will be lost after the device is powered off. Directly turn off the power switch on the U1980 subrack.