How can I configure the system on the TE Mobile?

Multiprotocol Label Switching Traffic engineering (MPLS TE) can prevent congestion caused by improper resource allocation by allocating some traffic to idle links, allowing network traffic to be allocated properly. The MPLS TE configurations on different switch models are the same. For details, see "CLI-based Configuration > Configuration Guide - MPLS > MPLS TE Configuration" in S7700&S9700 V200R010C00 Product Documentation.

Configure a corporate directory on the TE Desktop, TE Desktop for Mac, and TE Mobile as follows: Export the corporate directory as a CVS file, edit the CVS file, and import the CVS file.

The method of configuring the iOS TE Mobile server is as follows: Configure the server address on the login page as follows: On the login page, enter the correct server address in server address text box. The default transmission mode is TLS, and the server port number is 5061 upon your initial login. Open the server configuration window as follows: 1. On the login page, tap the Settings button. The configuration window is displayed. 2. Tap Server Settings. Parameter description: The server address and port number indicate the IP address and port number of the SC server. Obtain the IP address and port number from the SC server administrator. The transmission mode indicates the protocol used for SIP signaling transmission. The TLS option indicates that TLS is used to ensure SIP signaling transmission security. If you select this option, you must import a TLS root certificate. By default, the Huawei TLS root certificate is imported. You can also import other root certificates. The UDP option indicates that UDP is used to implement optimized SIP signaling transmission. For details, see 5 Configuration.

Log in on a web interface, choose System Settings > Display > Site name, and set Site name.

The TE series endpoint fails to be upgraded, so you need to upgrade its mini system. To upgrade the mini system of the TE series endpoint, perform the following steps: 1. While the endpoint is restarting or powering on, press and hold the RESET button for 10s or more. 2. Log in to the endpoint through Telnet and run the mnt upgswitch on command to enable the mini system upgrade function. 3. Use the upgrade tool UpgradeTool.exe to upgrade the mini system.