How can I import a certificate for the TE Mobile?

For S series switches (except the S1700), use either of the following methods to import traffic to the TE tunnel: - Configure static routes. For example, after you run the ip route-static 10.0.0.0 24 tunnel1/0/0 command, traffic destined for 10.0.0.0/8 is forwarded through Tunnel1/0/0. - Configure auto routes in IGP shortcut mode. After the auto routes are configured in IGP shortcut mode, TE tunnels act as logical links to participate in IGP route calculation and tunnel interfaces are used as the outbound interfaces of the ingress routers, and do not affect the IGP route calculation by other routers.

1.Use WinSCP to copy the security certificate (including files cacert.pem, server.crt, and server.key) to the /home/permitdir directory of the active OMS for the CDC. Use the opadmin account and floating IP address of the management plane to log in to the active OMS. For details about how to use WinSCP, see How Can I Use WinSCP to Transfer a File in the HUAWEI OceanStor UDS Massive Storage System V100R002C01 Software Installation Guide. 2.Use PuTTY to log in to the active OMS. Use the opadmin account and Floating IP address of the management plane for login. Run the su - root command to switch to the root account. 3.Run the following command to disable the automatic exit of PuTTY. TMOUT=0 4.Run the following command to import the security certificate. sh /opt/obs/scripts/upf/replaceGaussCA.sh -f /home/permitdir –p passwordpassword is the password of the server.key file. After the certificate is imported successfully, the following output is displayed: server started 5.Import the security certificate to the standby OMS. OMS02 is used as an example. a.Run the cd /home/permitdir command to go to the /home/permitdir directory of the active OMS. b.Run the following command to copy the security certificate (including files cacert.pem, server.crt, and server.key) from the active OMS to the /home/permitdir directory of OMS02. scp cacert.pem server.crt server.key opadmin@OMS02:/home/permitdir The opadmin account and password of OMS02 are required. After the certificate file is copied successfully, the following output is displayed: cacert.pem 100% 952 0.9KB/s 00:00 server.crt 100% 3046 3.0KB/s 00:00 server.key 100% 891 0.9KB/s 00:00 c.Run the ssh opadmin@OMS02 command to log in to OMS02. The opadmin account and password of OMS02 are required. After the login, run the su - root command to switch to the root account. d.Run the following command to disable the automatic exit of PuTTY. TMOUT=0 e.Import the security certificate to the standby OMS. For details, see Step 4. 6.Import the security certificate for the GSDC and GADC respectively. For details, see Step 1 to Step 5.

Import and export the contacts list on the TE Mobile, perform the following operations: Import edited contact records to the TE Mobile. Then, the contact records are displayed in the local contacts list. The local contact list on the TE Mobile can be also exported to the device for batch editing, backup, and transfer. Exported contacts are saved in *.csv format. Import and export contacts as follows: On the local contacts list page, tap Contact and select Import or Export.

To import a license into a TE series endpoint, perform the following steps: 1. Log in to the endpoint web interface and choose System Settings > Installation. 2. Click Import License. The Import License dialog box is displayed. 3. Click Select File. Select the license file you want to import and click Import. The endpoint will restart after the import is complete.