Homepage FAQ Telepresence and Video Conferencing

Does the SIP server need to open ports?

186

The SIP server needs to open ports.
Take the SC server as an example.
Source IP address Source port number Open SC port number Protocol Port description
SIP UA IP address 1024-65535 5060 UDP SIP TCP/UDP Port for listening signaling from the SIP node
SIP UA IP address 1024-65535 5061 TCP SIP TLS Port for listening for signaling from the SIP node
SIP UA IP address 1024-65535 5070-6071 UDP SIP BFCP port Port opened when the shared presentation is required
IP address on the SC public network 10010-11010 (Note: An openness source is required) TCP for SIP and TCP/TLS Port for calling unregistered extranet devices
IP address of the H.323/SIP device 1024-65535 20010-32010 UDP RTP Port for receiving voice and video code streams from the H.323 node and SIP UA

Other related questions:

Does the firewall need to be open for the E1 line of AR routers

The E1 line of AR routers can be seen as an external line or dedicated line. You can configure the firewall based on actual requirements.

What kind of servers does FusionInsight need?

FusionInsight can be deployed on general-purpose x86 servers. The platform is compatible with all brands of servers. Additionally, FusionInsight supports heterogeneous servers.

Whether IAD1224 support configure multi SIP server

IAD1224 support multi server mode, up to 3 SIP server registration.Support 3 SIP server registration at most. Comment:It should be noted that the corresponding SIP authenticated number on the registered SIP server must be consistent with the IAD side.

Did the SIP trunk need extralicense or not .

no need to add exttra license

Does the UMS server configured for the U1960 need a license

The UMS server needs a license. Contact the vendor of the UMS server to obtain more information.