Which interface backup modes are supported by AR routers

0

AR routers support two interface backup modes: active/standby mode and load balancing mode. V200R001C01 and later versions support three association modes: association between interface backup and NQA, association between interface backup and BFD, and association between interface backup and routing.

Other related questions:
Which types of active interfaces and standby interfaces are supported by the AR router
Types of active interfaces supported by the AR routers: Layer 3 Ethernet interfaces and their sub-interfaces, dialer interfaces, ATM interfaces, ISDN BRI interfaces, asynchronous interfaces, cellular interfaces, PON interfaces, MP-group interfaces, MFR interfaces, FR sub-interfaces, and serial interfaces and their sub-interfaces Types of standby interfaces supported by the AR routers: Layer 3 Ethernet interfaces and their sub-interfaces, dialer interfaces, ATM interfaces, BRI interfaces, asynchronous interfaces, cellular interfaces, MP-group interfaces, MFR interfaces, FR sub-interfaces, and serial interfaces and their sub-interfaces. ISDN BRI interfaces, PON interfaces, and asynchronous interfaces cannot be used as active or standby interfaces on AR120&AR150&AR160&AR200 series.

Whether the AR router supports interface backup
AR routers support interface backup.

Which interfaces on the AR router support LLDP
For V200R002C00 and later versions, only Layer 2 Ethernet interfaces on the AR series router support LLDP. For V200R002C01 and later versions, Layer 2 and Layer 3 Ethernet interfaces on the AR series router support LLDP.

Which interfaces of the AR router support PPPoE dialup
1. A VT interface must be bound to an interface so that the PPPoE server can be implemented. The PPPoE server can be configured on a physical Ethernet interface, a PON interface, a VLANIF interface, or a virtual Ethernet interface. 2. The dialer interface must be bound to an interface so that the PPPoE client can be implemented. The PPPoE client can be configured on a physical Ethernet interface, a PON interface, or a virtual Ethernet interface. The physical Ethernet interfaces refer to WAN-side Ethernet interfaces. LAN-side Ethernet interfaces do not support PPPoE.

Which interfaces can be configured with MPLS
MPLS can be configured on the following interfaces: - GE interface - GE sub-interface - XGE interface (V200R005C10 and later versions) - XGE sub-interface (V200R005C10 and later versions) - Ethernet interface - Ethernet sub-interface - Eth-Trunk - Eth-trunk sub-interface - Serial interface - POS interface - MP-Group - IP-Trunk (V200R005C10 and later versions)

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top