How to configure interface-based rate limiting through the web platform on the AR

The procedure for configuring rate limiting based on the IP address through the web platform is as follows: 1. Choose QoS > Interface Rate Limit to access the Interface Rate Limit. 2. Click Create in Interface Rate Limit List. 3. On the Create Interface Rate Limit page, select IP, and select or enter parameters. 4. Click OK to save the parameter settings.

For details, see Classics Edition > 2.16 QoS.

1. Choose QoS > Interface Rate Limit to access the Interface Rate Limit page. 2. Click Create in the Interface Rate Limit List toolbar. 3. On the Create Interface Rate Limit page, select or enter parameters based on requirements. 4. Click OK to save the parameter settings. To delete interface-based rate limiting, perform the following operations: 1. Choose QoS > Interface Rate Limit to access the Interface Rate Limit page. 2. In the Interface Rate Limit List toolbar, select the interface where the rate limtiing configuration needs to be deleted and click Delete. 3. In the displayed dialog box, click OK.

AR series routers do not support the configuration of redirection through the web platform.