Method used to configure QoS through the web platform on the AR

1

For details, see Classics Edition > 2.16 QoS.

Other related questions:
How to configure redirection through the web platform on the AR
AR series routers do not support the configuration of redirection through the web platform.

How to configure interface-based rate limiting through the web platform on the AR
1. Choose QoS > Interface Rate Limit to access the Interface Rate Limit page. 2. Click Create in the Interface Rate Limit List toolbar. 3. On the Create Interface Rate Limit page, select or enter parameters based on requirements. 4. Click OK to save the parameter settings. To delete interface-based rate limiting, perform the following operations: 1. Choose QoS > Interface Rate Limit to access the Interface Rate Limit page. 2. In the Interface Rate Limit List toolbar, select the interface where the rate limtiing configuration needs to be deleted and click Delete. 3. In the displayed dialog box, click OK.

How to configure WLAN AC through the web platform on the AR
WLAN AC can be configured through the web platform on all AR routers of V200R005C20 and later versions. The procedure for configuring WLAN AC through the web platform on an AR is as follows: 1. Enable the DHCP function. 2. Create the mVLAN interface. 3. Create the service VLAN interface. 4. Configure AC system parameters. 5. Create an ESS interface. 6. Select the wireless service type. 7. Configure the AP. 8. Configure the radio. 9. Configure wireless service. 10. Confirm the configuration. V200R005C20 to V200R007C00, for details, see Example for Configuring the WLAN AC Service(V200R005C20 to V200R007C00). V200R008C00, for details, see Example for Configuring Basic WLAN AC Services(V200R008).

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top