InfiniBand protocols and standards supported by Huawei


Huawei InfiniBand interface modules currently support the fourteen data rate (FDR) and are compatible with the quad data rate (QDR). A single interface provides quadruple rate depending on whether FDR or QDR is used. The interface bandwidth is up to 56 Gbit/s. The upper-layer SRP is supported and the storage SCSI protocol can be used to provide SAN services. IPoIB will be supported later to provide NAS services. Communication management based on OpenSM is supported.

Other related questions:
Standard spanning tree protocols used on S series switch
S series switches (except S1700 switches) support the following standard spanning tree protocols: 1. STP: Spanning Tree Protocol 2. RSTP: Rapid Spanning Tree Protocol, compatible with STP 3. MSTP: Multiple Spanning Tree Protocol, compatible with STP and RSTP By default, S series switches use MSTP. When running a command to set STP mode, you can select STP, RSTP, or MSTP. VLAN-Based Spanning Tree (VBST) is a Huawei proprietary spanning tree protocol, which sets up a spanning tree for each VLAN, so traffic in different VLANs can be forwarded through different spanning trees.

What connection protocols can Huawei camera support
Huawei IP Camera support SDK, ONVIF,GENETEC, T28181

What Are the Reference Standards and Protocols for the IPsec VPN?

The following standards and protocols are associated with the IPsec VPN:

  • RFC 4301: Security Architecture for the Internet Protocol
  • RFC 2403: The Use of HMAC-MD5-96 within ESP and AH
  • RFC 2409: The Internet Key Exchange (IKE)
  • RFC 2857: The Use of HMAC-RIPEMD-160-96 within ESP and AH
  • RFC 3566: The AES-XCBC-MAC-96 Algorithm and its use with IPsec
  • RFC 3625: More Modular Exponential (MODP) Diffie-Hellman groups for Internet Key Exchange (IKE)
  • RFC 3664: The AES-XCBC-PRF-128 Algorithm for the Internet Key Exchange Protocol (IKE)
  • RFC 3706: A Traffic-Based Method of Detecting Dead Internet Key Exchange (IKE) Peers
  • RFC 3748: Extensible Authentication Protocol (EAP)
  • RFC 3947: Negotiation of NAT-Traversal in the IKE
  • RFC 4109: Algorithms for Internet Key Exchange version 1 (IKEv1)
  • RFC 3948: UDP Encapsulation of IPsec ESP Packets
  • RFC 4305: Cryptographic Algorithm Implementation Requirements for Encapsulating Security Payload (ESP) and Authentication Header (AH)
  • RFC 4306: Internet Key Exchange (IKEv2) Protocol
  • RFC 4307: Cryptographic Algorithms for Use in the Internet Key Exchange Version 2 (IKEv2)
  • RFC 4322: Opportunistic Encryption using the Internet Key Exchange (IKE)
  • RFC 4359: The Use of RSA/SHA-1 Signatures within Encapsulating Security Payload (ESP) and Authentication Header (AH)
  • RFC 4434: The AES-XCBC-PRF-128 Algorithm for the Internet Key Exchange Protocol (IKE)
  • RFC 4478: Repeated Authentication in Internet Key Exchange (IKEv2)
  • RFC 5996: Internet Key Exchange Protocol Version 2 (IKEv2)

InfiniBand (IB), a computer-networking communications standard used in high-performance computing (HPC), features high throughput and low latency. It is developed by Mellanox and provides Quadruple Data Rate (QDR) and Fourteen Data Rate (FDR). The CX610 and CX611 switch modules of E9000 server support IB QDR and FDR.

Protocols and standards that Dorado V3 complies with
For protocols and standards that OceanStor Dorado5000 V3&Dorado6000 V3 storage system complies with, see: Standards Compliance.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top