Indicators on a V3 power module

4

Indicators on a V3 power module are described as follows:
Power supply running/alarm indicator
Steady green: The power supply is correct.
Blinking green: The power input is normal but the disk enclosure is powered off.
Steady red: The power supply is faulty.
Off: No external power is input.
BBU Running/Alarm indicator
Steady green: The BBU is fully charged.
Blinking green (1 HZ): The BBU is being charged.
Blinking green (4 HZ): The BBU is being discharged.
Steady red: The BBU is faulty.

Other related questions:
Indicators on a V3 expansion module
Indicators on a V3 expansion module are described as follows: Expansion module alarm indicator Steady red: An expansion module alarm is generated. Off: The expansion module is working correctly. Expansion module power indicator Steady green: The expansion module is powered on properly. Off: The expansion module is powered off. Mini SAS HD expansion port indicator Steady blue: The link to the expansion port is up and the data transfer rate is 4 x 12 Gbit/s. Steady green: The link to the expansion port is normal and the data transmission rate is 4 x 3 Gbit/s or 4 x 6 Gbit/s. Steady red: The port is faulty. Off: The link to the expansion port is down.

Indicators on a V3 disk module
Indicators on a V3 disk module are described as follows: Running indicator of a disk module Steady green: The disk module is working correctly. Blinking green: Data is being written to and read from the disk module. Off: The disk module is power off or powered on incorrectly. Alarm/Location indicator of a disk module Steady red: The disk module is faulty. Blinking red: The disk module is being located. Off: The disk module is working correctly or is hot-swappable.

Indicators on a V3 management module
Indicators on a V3 management module are described as follows: Power indicator on a management module Steady green: The interface module is working correctly. Blinking green: The interface module receives a hot swap request. Steady red: The interface module is faulty. Off: The interface module is powered off or is hot-swappable. Management network port Speed indicator Steady orange: Data is being transferred at the highest rate. Off: The data transfer speed is lower than the highest speed. Management network port Link/Active indicator Steady green: The port is connected properly. Blinking green: Data is being transferred. Off: The port is incorrectly connected.

V3 power module
V3 power modules are described as follows: The storage system supports AC power modules. Power modules can ensure that the controller enclosure works correctly in maximum power consumption mode.

Introduction to indicators on the Dorado power module
Indicators on a Dorado power module are described as follows: Power module running/alarm indicator Steady green: The power supply is correct. Blinking green: The power input is normal but the device is powered off. Steady red: The power supply is faulty. Off: No external power is input. BBU running/alarm indicator Steady green: The BBU is fully charged. Blinking green (1 Hz): The BBU is being charged. Blinking green (4 Hz): The BBU is being discharged. Steady red: The BBU is faulty.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top