Indicators on a V3 management module

0

Indicators on a V3 management module are described as follows:
Power indicator on a management module
Steady green: The interface module is working correctly.
Blinking green: The interface module receives a hot swap request.
Steady red: The interface module is faulty.
Off: The interface module is powered off or is hot-swappable.
Management network port Speed indicator
Steady orange: Data is being transferred at the highest rate.
Off: The data transfer speed is lower than the highest speed.
Management network port Link/Active indicator
Steady green: The port is connected properly.
Blinking green: Data is being transferred.
Off: The port is incorrectly connected.

Other related questions:
V3 management module
V3 management modules are described as follows: The management module provides management ports including USB ports, management network ports, serial ports, and maintenance network ports.

Indicators on a V3 expansion module
Indicators on a V3 expansion module are described as follows: Expansion module alarm indicator Steady red: An expansion module alarm is generated. Off: The expansion module is working correctly. Expansion module power indicator Steady green: The expansion module is powered on properly. Off: The expansion module is powered off. Mini SAS HD expansion port indicator Steady blue: The link to the expansion port is up and the data transfer rate is 4 x 12 Gbit/s. Steady green: The link to the expansion port is normal and the data transmission rate is 4 x 3 Gbit/s or 4 x 6 Gbit/s. Steady red: The port is faulty. Off: The link to the expansion port is down.

Indicators on a V3 disk module
Indicators on a V3 disk module are described as follows: Running indicator of a disk module Steady green: The disk module is working correctly. Blinking green: Data is being written to and read from the disk module. Off: The disk module is power off or powered on incorrectly. Alarm/Location indicator of a disk module Steady red: The disk module is faulty. Blinking red: The disk module is being located. Off: The disk module is working correctly or is hot-swappable.

Indicators on a V3 power module
Indicators on a V3 power module are described as follows: Power supply running/alarm indicator Steady green: The power supply is correct. Blinking green: The power input is normal but the disk enclosure is powered off. Steady red: The power supply is faulty. Off: No external power is input. BBU Running/Alarm indicator Steady green: The BBU is fully charged. Blinking green (1 HZ): The BBU is being charged. Blinking green (4 HZ): The BBU is being discharged. Steady red: The BBU is faulty.

Introduction to indicators on the Dorado management module
Indicators on a Dorado management module are described as follows: Power indicator on a management module Steady green: The interface module is working correctly. Blinking green: The interface module receives a hot swap request. Steady red: The interface module is faulty. Off: The interface module is powered off or is hot-swappable. Management network port speed indicator Steady orange: Data is being transferred at the highest rate. Off: The data transfer speed is lower than the highest speed. Link/Active indicator of the management network port Steady green: The port module is properly connected. Blinking green: Data is being transferred. Off: The port is incorrectly connected.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top