Indicators on a 10GE electrical interface module

3

Indicators on a 10GE electrical interface module are described as follows:
Power indicator/Hot swap button
Steady green: The interface module is working correctly.
Blinking green: The interface module receives a hot swap request.
Steady red: The interface module is faulty.
Off: The interface module is powered off or is hot-swappable.
Link/Active indicator of the 10GE electrical port
Steady green: The link to the application server is normal.
Blinking green: Data is being transferred.
Off: The link to the application server is down.
Speed indicator of the 10GE electrical port
Steady orange: Data is transferred between the storage system and application server at a rate of 10 Gbit/s.
Off: Data is transferred between the storage system and application server at a rate lower than 10 Gbit/s.

Other related questions:
10GE electrical interface module
10GE electrical interface modules are described as follows: A 10GE electrical interface module has four 10 Gbit/s electrical ports. These ports are the service ports used to connect a storage system to application servers and to receive read/write requests from application servers.

Indicators on a GE electrical interface module
Indicators on a GE electrical interface module are described as follows: Power indicator/Hot swap button Steady green: The interface module is working correctly. Blinking green: The interface module receives a hot swap request. Steady red: The interface module is faulty. Off: The interface module is powered off or is hot-swappable. Link/Active indicator of a GE electrical port Steady green: The link to the application server is normal. Blinking green: Data is being transferred. Off: The link to the application server is down. Speed indicator of a 10GE electrical port Steady orange: Data is transferred between the storage system and application server at a rate of 1 Gbit/s. Off: Data is transferred between the storage system and application server at a rate lower than 1 Gbit/s.

GE electrical interface module
GE electrical interface modules are described as follows: A GE electrical interface module has four 1 Gbit/s electrical ports. These ports are the service ports used to connect the storage system to application servers and to receive data read/write requests from application servers.

Can GE optical modules and GE electrical modules be installed on the same interface board of the S12700
GE optical modules and GE electrical modules can be installed on the same 1000M optical interface board of the S12700, but you must configure the O/E converter on the 1000M optical interface board. The 1000M optical interface board of the S12700 can use only the Huawei certified converter. When Non-Huawei O/E converters are installed on interfaces of the S12700, the interfaces still work as optical interfaces.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top