What does shaping active in the Enqueue field mean

21

If Shaping Active is in the Enqueue field, traffic shaping is configured in the traffic policy.


  • -The value Shaping Active:NO indicates that traffic does not exceed the traffic shaping threshold. Traffic shaping is not performed.
  • -The value Shaping Active:YES indicates that traffic has exceeded the traffic shaping threshold. Traffic shaping has been performed.

Other related questions:
What is the meaning of Busy Lamp Field (BLF)
The Busy Lamp Field (BLF) feature allows users to subscribe to the status (idle, call in progress, ringing, or offline) of others using the programmable buttons on the IP phone. Before making a call, the calling party can know the status of the called party. If the called party is not idle, the calling party waits until the called party becomes idle. This helps improve the call success rate.

What is the relationship among the Queue Matched, Enqueued, and Discarded fields in traffic policy statistics (V200R002C00 and later versions)
#NAME?

What is the relationship among the Enqueue, Queue pass, and Queue drop Fields in traffic policy statistics (V200R001C00 and V200R001C01)
#NAME?

Meanings of the lease field in dhcp snooping command output on S series switch
For S series switches, the lease field in the outputs of DHCP snooping configuration indicates the lease of IP addresses configured on the DHCP server. The lease time varies depending on network access requirements. By default, the IP address lease is one day. - In locations where clients often move, for example, cafes, airports, and hotels, plan a short-term lease to ensure that IP addresses are released quickly after the clients go offline. - In locations where clients seldom move, for example, office areas of an enterprise, plan a long-term lease to prevent services from being affected by frequent address renewals. Different address pools on a DHCP server can be configured with different IP address leases, but the IP addresses in an address pool must be configured with the same lease. You can run the following commands to modify the lease time: - Run the dhcp server lease { day day [ hour hour [ minute minute ] ] | unlimited } command to set the lease for IP addresses in an interface address pool. For example, set the IP address lease of the address pool on VLANIF 100 to 2 days 2 hours and 30 minutes. [HUAWEI] dhcp enable [HUAWEI] interface vlanif 100 [HUAWEI-Vlanif100] ip address 10.10.10.10 24 [HUAWEI-Vlanif100] dhcp select interface [HUAWEI-Vlanif100] dhcp server lease day 2 hour 2 minute 30 - Run the lease { day day [ hour hour [ minute minute ] ] | unlimited } command to set the lease for IP addresses in a global IP address pool. For example, set the IP address lease of the global address pool global1 to 2 day 2 hours and 30 minutes. [HUAWEI] ip pool global1 [HUAWEI-ip-pool-global1] lease day 2 hour 2 minute 30

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top