Method used to change the IP address of the management network port on OceanStor V3 storage systems

0

After logging in to the OceanStor V300R001 storage system through the CLI, you can run the change system management_ip command to change the IP address of the management network port. The two ports whose name suffix is MGMT0 are the management network ports.

Other related questions:
Method used to change the IP address of the management network port on OceanStor V3 storage systems
After logging in to the OceanStor V300R001 storage system through the CLI, you can run the change system management_ip command to change the IP address of the management network port. The two ports whose name suffix is MGMT0 are the management network ports.

Method used to retrieve the IP address of the management network port on OceanStor V3 storage systems
1. Use the serial port cable to connect the maintenance terminal and storage device. 2. Log in to the serial port through the HyperTerminal. 3. Run the show system management_ip command to retrieve the IP address of the management network port. The two ports whose name suffix is MGMT0 are the management network ports.

Method used to change the IP address of the management network port on OceanStor T Series unified storage systems
After logging in to the OceanStor T Series V100R005 storage system through the CLI, you can run the chgctrlip command to change the IP address of the management network port. For details, go to the Changing IP Addresses of Management Network Ports page.

Method used to retrieve the IP address of the management network port on OceanStor T Series unified storage systems
You can retrieve the IP address of the management network port on OceanStor T Series V100R005 storage systems by using the following method: 1. Use the serial cable to connect the maintenance terminal and storage device. 2. Log in to the serial port through the HyperTerminal. 3. Run the showctrlip command to retrieve the IP address of the management network port.

Method used to configure service IP addresses for an OceanStor V3 storage system
Method used to configure service IP addresses for an OceanStor V3 storage system: In the rear view of the device displayed in OceanStor DeviceManager, click the port whose IP address you want to modify and modify the IP address.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top