Method used to retrieve the IP address of the management network port on OceanStor V3 storage systems

1

1. Use the serial port cable to connect the maintenance terminal and storage device.
2. Log in to the serial port through the HyperTerminal.
3. Run the show system management_ip command to retrieve the IP address of the management network port. The two ports whose name suffix is MGMT0 are the management network ports.

Other related questions:
Method used to change the IP address of the management network port on OceanStor V3 storage systems
After logging in to the OceanStor V300R001 storage system through the CLI, you can run the change system management_ip command to change the IP address of the management network port. The two ports whose name suffix is MGMT0 are the management network ports.

Method used to retrieve the IP address of the management network port on OceanStor T Series unified storage systems
You can retrieve the IP address of the management network port on OceanStor T Series V100R005 storage systems by using the following method: 1. Use the serial cable to connect the maintenance terminal and storage device. 2. Log in to the serial port through the HyperTerminal. 3. Run the showctrlip command to retrieve the IP address of the management network port.

How to retrieve a forgotten IP address of the management network port of the storage system?
Log in to the storage system through the serial port. Run the showctrlip command to query the IP address of the management network port of controller.

Method used to retrieve or initialize the password of OceanStor V3 storage systems
The admin user of OceanStor V300R001 storage systems can run the line change user user_name=? action=reset_password command on the CLI to initialize the administrator and read-only users' passwords. After initialization, the password is Admin@storage. If user admin (super administrator) forgets the password, contact Huawei technical support by dialing +86-400-822-9999. If you are a Huawei engineer, refer to related chapters in the maintenance cases and FAQs: How Do I Initialize the Password of an Admin User? .

Method used to change the IP address of the management network port on OceanStor T Series unified storage systems
After logging in to the OceanStor T Series V100R005 storage system through the CLI, you can run the chgctrlip command to change the IP address of the management network port. For details, go to the Changing IP Addresses of Management Network Ports page.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top