Method used to bond ports on OceanStor V3 unified storage systems

0

On OceanStor V300R001 storage systems, you can bond multiple iSCSI host ports. In doing so, the data transmission rate of these iSCSI host ports can be improved significantly (assuming other components do not reach their performance bottlenecks). For details, see Bonding Ethernet Ports .

Other related questions:
Method used to bond ports on OceanStor T Series unified storage systems
On OceanStor T Series V100R005 storage systems, you can bond multiple iSCSI host ports in 802.3ad mode. In doing so, the data transmission rate of these iSCSI host ports can be improved significantly (assuming other components do not reach their performance bottlenecks). For details about this mode, see Tips for Bonding Storage Ports.

Bonding of Fibre Channel host ports on OceanStor V3 storage systems
OceanStor V300R001 storage systems do not support the bonding of Fibre Channel host ports.

Requirements for NAS service port bonding on the OceanStor V3 storage
The network port binding mode of OceanStor V3 storage systems is bond4. After port bonding, the following restrictions apply: 1. You must configure the 802.3ad dynamic link aggregation control protocol (LACP) mode for corresponding bond ports on the switch. 2. The storage system does not support the following port binding modes: Bonding of both GE and 10GE ports Bonding of ports on different interface modules or on different nodes FCoE ports cannot be bonded.

CRUs and FRUs of OceanStor V3 unified storage systems
You can obtain the lists of customer replacement units (CRUs) and field replaceable units (FRUs) of OceanStor V3 storage systems from the following link: CRUs and FRUs .

Method used to expand file systems on OceanStor V3 storage systems
For details about the configuration method, see Expanding a File System .

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top