How to set the short message and email notification of fault information in the storage system?

1

1. Log in to the ISM, expand the storage device, and select Settings. In the function pane, choose Event Notification Settings. The Event Notification Settings dialog box is displayed.
2. Then select the Enable check boxes on the Email Notification and SMS Notification tab pages. Enter the settings as required.

Other related questions:
Method used to install GSM MODEM for OceanStor T Series unified storage
For details about how to install GSM MODEM and set short messages, see Setting the SMS Notification.

Network requirements for sending alarm notification emails on OceanStor 9000
To ensure OceanStor 9000 has the correct setting for sending alarm notification emails, the management IP address of OceanStor 9000 and the IP address of the SMTP server must be able to ping each other, and the SMTP server must be connected to the Internet.

Configuring email notification for OceanStor 9000 V100R001C01
Procedure for configuring email notification for OceanStor 9000 V100R001C01: 1. Log in to DeviceManager. 2. Choose Settings > Alarm Settings > Email Notification. 3. Select Enable. 4. Configure Sender Email and SMTP Server. 5. Select language type in E-mail Language Settings. The default value is English. 6. Add recipient information a. In the Recipient Settings area, click Add. b. In the Add Recipient Information dialog box, set Email to the recipient email address, select alarm severities for alarms to be sent in Alarm Severity, and click OK. c. Click Save. 7. Select an email address and click Test.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top