How Can I Do If a Message Is Displayed Indicating That the Hardware Is Inconsistent with the Standard Configuration?

2

File engine configurations include maximum configuration and minimum configuration. Different device models correspond to different configurations. If an incorrect configuration is selected, the configuration fails. Use the correct control board or CPU/memory.

Other related questions:
Actions taken if the hardware is inconsistent with the standard configuration during the adding of a secondary node
The file engine configuration varies depending on the device model. If an incorrect configuration is selected, the configuration fails. Use the correct controller module or CPU/memory.

Actions taken if the hardware is inconsistent with the standard configuration during the deployment of a file engine
The file engine configuration varies depending on the device model. If an incorrect configuration is selected, the configuration fails. Use the correct controller module or CPU/memory.

The TE80 displays a message indicating a conference fails to be initiated.
If the TE80 displays a message indicating a conference fails to be initiated, the possible cause is as follows: The GK disables the HTTP port after HTTPS encryption is enabled for the SiteCall channel. If HTTPS encryption is disabled on the codecs, the codecs connect to the HTTP port. As a result, a conference fails to be initiated because the HTTP port cannot be connected. Solution: Ensure that the HTTPS encryption configuration is consistent between the GK and TE80 codecs.

How can I do if a message is displayed indicating that IP address calls are forbidden when a participant is called?
To enable IP address calls: 1. Log in to the SMC2.0 web page as the admin user. 2. Choose Devices > SC. 3. Select the SC to be modified and select Allow unknown calls. Since the V5R2C10 version of VP9600 series MCU, the restriction is added and is not supported by default. You need to log in to the CLI and modify the configuration as follows: Run the system-view conf-policy enable-ip-call 1 command. The default value is 0, and the value 1 indicates that IP address calls are enabled. Related configuration may cause unauthorized call resource using, resulting in high call fees. Contact professional personnel to determine whether to modify the configuration.

What can I do if a message is displayed, indicating that the user account is locked, during the login to an IPC?
A user account is locked if the number of consecutive incorrect password inputs exceeds the maximum. You can log in to the IPC again using the correct password 5 minutes later. For details, see the User Guide.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top