How Can I Do If One Device Is Detected As Multiple Devices?

1

In normal conditions, even multiple file engine enclosures (more than two nodes) are detected as one device. If a device is detected as multiple devices, it is likely that incorrect heartbeat network information is obtained. You need to check whether the heartbeat connections of all nodes are correct.

Other related questions:
How Can I Do If the ISM Can Detect Storage Devices Only, But Cannot Detect File Engines?
This fault occurs because no deployment tools are used for deployment and the procedure of manual deployment is incomplete, or the file engine information on the storage devices was deleted. To rectify the fault, enter the engineer mode on the storage devices and run chgnasinfo to register the management IP address of the file engine again.

Actions taken if ISM can detect storage devices but cannot detect file engines
This fault occurs if no deployment tools are used for deployment and the procedure of manual deployment is incomplete, or the file engine information on the storage devices was deleted. To rectify the fault, enter the engineer mode on the storage device and run the chgnasinfo command to register the management IP address of the file engine again.

Can one U1980 be managed by multiple BMUs
One U1980 can be managed by only one BMU.

Can Multiple Trackers Be Created for One Tenant?

Currently, only one tracker can be created for each tenant.


If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top