How many expansion slots does a file engine node have and where are they?

1

A file engine node offers four expansion slots for an Ethernet adapter with four 1 Gbit/s network ports, a 10 Gbit/s Ethernet adapter with two 10 Gbit/s network ports.

A1, A2, A3, and A4 (B1, B2, B3, and B4) on the slot area of the rear panel of the file engine stand for expansion slots.

Other related questions:
How many file system mirrors are supported by the file engine at most?
The file engine can support a maximum of three file system mirrors. Parent topic: FAQ

How Can I Do If a Node of a File Engine Fails to Be Detected During File Engine Configuration?
If you fail to detect a node of a file engine, perform the following operations: Verify that the management port of the file engine is correctly connected. Verify that the file engine is correctly started.

Identifying management servers in OceanStor 9000 V100R001C01
Nodes 1 to 3 (numbered from the bottom up) in the cabinet are used as the management network elements in OceanStor 9000 V100R001C01 by default.

How many types of IP address are used in the file engine?
Three types of IP address are used in the file engine, namely, physical IP addresses, virtual IP addresses, and console IP addresses.

How many periodic snapshots are supported by the file engine at most?
The file engine can support a maximum of 128 periodic snapshots.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top