Method used to change the IP address of the management network port on OceanStor T Series unified storage systems

1

After logging in to the OceanStor T Series V100R005 storage system through the CLI, you can run the chgctrlip command to change the IP address of the management network port. For details, go to the Changing IP Addresses of Management Network Ports page.

Other related questions:
Method used to retrieve the IP address of the management network port on OceanStor T Series unified storage systems
You can retrieve the IP address of the management network port on OceanStor T Series V100R005 storage systems by using the following method: 1. Use the serial cable to connect the maintenance terminal and storage device. 2. Log in to the serial port through the HyperTerminal. 3. Run the showctrlip command to retrieve the IP address of the management network port.

Method used to change the IP address of the management network port on OceanStor V3 storage systems
After logging in to the OceanStor V300R001 storage system through the CLI, you can run the change system management_ip command to change the IP address of the management network port. The two ports whose name suffix is MGMT0 are the management network ports.

Method used to bond ports on OceanStor T Series unified storage systems
On OceanStor T Series V100R005 storage systems, you can bond multiple iSCSI host ports in 802.3ad mode. In doing so, the data transmission rate of these iSCSI host ports can be improved significantly (assuming other components do not reach their performance bottlenecks). For details about this mode, see Tips for Bonding Storage Ports.

Method used to retrieve the IP address of the management network port on OceanStor V3 storage systems
1. Use the serial port cable to connect the maintenance terminal and storage device. 2. Log in to the serial port through the HyperTerminal. 3. Run the show system management_ip command to retrieve the IP address of the management network port. The two ports whose name suffix is MGMT0 are the management network ports.

Default IP address of the OceanStor T Series management network port
The default IP address of the management network port in OceanStor T V100R005 storage systems is 192.168.128.101 or 192.168.128.102.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top