Method used to retrieve the IP address of the management network port on OceanStor T Series unified storage systems

3

You can retrieve the IP address of the management network port on OceanStor T Series V100R005 storage systems by using the following method:
1. Use the serial cable to connect the maintenance terminal and storage device.
2. Log in to the serial port through the HyperTerminal.
3. Run the showctrlip command to retrieve the IP address of the management network port.

Other related questions:
Method used to change the IP address of the management network port on OceanStor T Series unified storage systems
After logging in to the OceanStor T Series V100R005 storage system through the CLI, you can run the chgctrlip command to change the IP address of the management network port. For details, go to the Changing IP Addresses of Management Network Ports page.

Method used to retrieve the IP address of the management network port on OceanStor V3 storage systems
1. Use the serial port cable to connect the maintenance terminal and storage device. 2. Log in to the serial port through the HyperTerminal. 3. Run the show system management_ip command to retrieve the IP address of the management network port. The two ports whose name suffix is MGMT0 are the management network ports.

Method used to retrieve the account and password of OceanStor T Series unified storage systems
The admin user of the OceanStor T Series V10R005 storage system can initiate passwords of ordinary administrators and read-only users by running the resetuserpwd command on the CLI. The initial password is Admin@storage. If user admin (super administrator) forgets the password, contact Huawei technical support engineers. For details, see Tips for Managing Users and Passwords.

Method used to bond ports on OceanStor T Series unified storage systems
On OceanStor T Series V100R005 storage systems, you can bond multiple iSCSI host ports in 802.3ad mode. In doing so, the data transmission rate of these iSCSI host ports can be improved significantly (assuming other components do not reach their performance bottlenecks). For details about this mode, see Tips for Bonding Storage Ports.

Method used to change the IP address of the management network port on OceanStor V3 storage systems
After logging in to the OceanStor V300R001 storage system through the CLI, you can run the change system management_ip command to change the IP address of the management network port. The two ports whose name suffix is MGMT0 are the management network ports.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top