Common NQA query commands on the AR router

2

Common NQA query commands on the AR router:
Run the display nqa-parameter command in the NQA view to check parameter settings of the NQA test instance.
Run the display nqa history command in any view to check historical statistics about the NQA test instance.
Run the display nqa results command in any view to check NQA test instance results.

Other related questions:
Common commands used to delete routes on AR routers
The ip address command configures an IP address for an interface. The undo ip address command deletes an IP address from an interface. The ip route-static command configures a static route. The ip route-static command deletes the configured static route. The ip ip-prefix command configures an IPv4 prefix list or one entry in the IPv4 prefix list. The undo ip ip-prefix command deletes an IPv4 prefix list or one entry in the IPv4 prefix list.

Method of querying card models on an AR router
Run the display device command or the display elabel command on an AR router to query component types of the router. The card names obtained using these two commands may be different, because the card names obtained by running the display device command are planned in advance but electronic labels are unique IDs of the cards and will not change with software upgrades.

Method of querying electronic labels on an AR router
The electronic labels of an AR router are used to identify hardware information of the router, including component barcode, production date, and BOM code. Run the display elabel command to obtain the information.

Method of querying CPU usage on an AR router
Query CPU usage by running the following commands on an AR router: - display cpu-usage [ slot slot-id ] Or display cpu-usage [ process process-id ] [ slave ] - display cpu-usage configuration [ slave | slot slot-id ]. This command is used to query configuration information about CPU usage. Query CPU usage based on the NMS OID on an AR router: - hwEntityCpuUsage 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5, querying CPU usage - hwEntityCpuUsageThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.6, querying alarm thresholds for CPU usage Query CPU usage through the web NMS on an AR router: Log in to the web NMS, and choose Device Information > Device Information to view the CPU usage item.

Support for NQA on the AR router
All AR series routers support NQA, without the license.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top