Method used to replace coffer disks of OceanStor T Series unified storage

Method used to install coffer disks of OceanStor T Series unified storage: For OceanStor T Series unified storage whose disks and controllers are integrated, slots 0 to 3 of controller enclosures must be inserted with coffer disks. For OceanStor T Series unified storage whose disks and controllers are separated, slots 0 to 3 of the first disk enclosure must be inserted with coffer disks. At least one disk must be seated in slot 0 or 1 and at least one disk in slot 2 or 3. Insert disks delivered to the site to the slots as described above, and attach coffer disk labels to the disks.

Coffer disks of OceanStor T Series unified storage can be replaced with other types of disks or their position can be changed. The replacement of coffer disks has no impact on the operating system of storage systems. Export database data before replacing coffer disks; otherwise, the original configuration data, events, and logs will be lost. Ensure that coffer disks are of the same type. If coffer disks are in the same RAID group, disks in the RAID group must be of the same type.

Hot spare disks of OceanStor T Series unified storage cannot be set to coffer disks.

You do not need to configure coffer disks of OceanStor T Series unified storage.

Coffer disks of unified storage store the configuration data of the storage system, events, logs, and dirty data. Remaining capacity of coffer disks can be used to store storage service data. Coffer disks can be added to RAID groups as member disks.