Maximum input power of the S5000 controller enclosure or disk enclosure in full configuration (loading 24 x 450 GB Fibre Channel disks)

0

Maximum input power of the S5000 controller enclosure or disk enclosure in full configuration (loading 24 x 450 GB Fibre Channel disks):
FAQ-What is the maximum input power of the S5000 controller enclosure or disk enclosure in full configuration (loading 24x450 GB FC disks)

Other related questions:
Method used to connect the storage device's controller enclosures and disk enclosures
Visit the following website and refer to the networking assistant: http://support.huawei.com/onlinetoolsweb/sna/?language=en

V3 disk enclosure
V3 disk enclosures are described as follows: A disk enclosure adopts a modular design and consists of a system enclosure, expansion modules, power modules, and disk modules.

Numbering convention of disk slots in the controller enclosure and disk enclosure for SAN storage products
Numbering convention of disk slots in the controller enclosure and disk enclosure for SAN storage products: FAQ-What is the numbering convention of disk slots in the controller enclosure and disk enclosure

Can a coffer disk be replaced by the coffer disk in another controller enclosure?
No. Coffer disks are used to store important data for the storage system, including configuration data, event information, and log information. When the storage system encounters an unexpected power failure, data in cache is written onto coffer disks. Even the two controller enclosures are of the same manufacturer and type, data stored on their coffer disks is different; therefore, coffer disks in different controller enclosures cannot be interchanged.

Redundancy mechanism of a disk enclosure's power modules
2 U and 4 U disk enclosures have different power module configurations. 2 U disk enclosure: Configure two power modules for 1+1 redundancy. The failure of either power module does not affect the proper running of the disk enclosure. 4 U disk enclosure: Configure four power modules for 2+2 redundancy. The failure of any two power modules does not affect the proper running of the disk enclosure.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top