Method used to replace a KO file on SUSE?

0

How do I replace a KO file on SUSE?
If you want to replace or add a KO file, perform the following steps:
1. Upload the KO file to the host system.
The directory to which the KO file is uploaded is generally /lib/module/xxxx/kernel/scsi.
2. Modify properties of the KO file to be same as those of other KO files.
3. Load the KO file.
Run the insmod /lib/module/xxxx/kernel/scsi/yyy.ko command, and then lsmod to verify that the KO file has been loaded.
4. Run the mkinitrd command on the host system to edit the kernel again.
5. Restart the host system.

Other related questions:
Methods used to copy files to a VM
You can copy files to a VM in the following ways: 1. Configure a USB port redirection policy and copy the files using USB devices, such as a USB flash drive. 2. Enable the VM's remote desktop function and copy the files. 3. Copy the files in folder sharing mode.

How to obtain a license file on the AR
After the license is successfully activated upon authorization, you can load the license file directly or download the license file on the NE management page.

Method used to restore deleted files on HDFS
On HDFS, deleted files are moved to the recycle bin (trash can) so that the data deleted by mistake can be restored. You can set the time threshold for storing files in the recycle bin. Once the file storage duration exceeds the threshold, it is permanently deleted from the recycle bin. If the recycle bin is cleared, all files in it are permanently deleted.

Method used to upgrade and combine license files
For the method used to upgrade and combine license files, see: FAQ-How Can I Upgrade and Combine License Files

Method used to locate the disk slot before replacing a disk
You can locate the disk slot before replacing a disk as follows: 1. Fault location and rectification a. The method is used before replacing a faulty disk. b. The method is used before replacing a risky disk. c. You may stay on the OSM for some time until timeout and logging out of the OSM. The disk slot locating expires and the disk slot requires a relocating. 2. Solution a. Log in to the OSM of the storage system. b. Select Devices and then the enclosure where a disk be replaced resides. Click the disk that you want to replace. In the dialog box that is displayed, click Locating hard disks. c. A dialog box is displayed indicating that the operation is successful. Do not close the dialog box. Otherwise, the disk location indicator is turned off. d. The slot whose indicator (alarm indicator) blinks red is where the disk to be replaced locates. Replace the disk. The location indicator of a disk blinks red while the alarm indicator of a disk is in steady red mode. You must differentiate the enclosure indicator and disk fault indicator. Engineers may regard the enclosure alarm indicator as the disk alarm indicator and remove the disk in slot (0,8). After the faulty disk is replaced, return to the OSM and close the location function (close the dialog box that is displayed in step c).

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top