Method to activate the new host interface card on 5600T

Save the configuration file to a specified directory as follows: Method 1: 1. cd flash:/Access the Flash directory. 2. mkdir test/Create the test directory (folder). Info: Create directory flash:/test......Done. 3. cd test/Access the test directory. 4. save configuration.zip/Save the configuration to configuration.zip. Are you sure to save the configuration to flash:/test/configuration.zip?[Y/N]:y Now saving the current configuration to the device. 2015-04-22 17:52:46 Firewall %%01CFM/4/SAVE_FILE(l): When deciding whether to save con figuration to the file flash:/test/configuration.zip, the user chose Y... Info: Save the current config to flash:/test/configuration.zip successfully 5. dir/Display the configuration file saved under the test directory. 17:52:49 2015/04/22 Directory of flash:/test/ 0 -rw- 1009 Apr 22 2015 17:52:47 configuration.zip/Saved configuration file. 31248 KB total (31104 KB free) Method 2: 1. save flash:/test/conf.zip /Save configuration file conf.zip to Flash:/test. Are you sure to save the configuration to flash:/test/conf.zip?[Y/N]:y Now saving the current configuration to the device. 2015-04-22 17:58:25 Firewall %%01CFM/4/SAVE_FILE(l): When deciding whether to save con figuration to the file flash:/test/conf.zip, the user chose Y... Info: Save the current config to flash:/test/conf.zip successfully 2. dir /Displays the file under the Flash directory. 17:58:29 2015/04/22 Directory of flash:/ 0 -rw- 61 Apr 22 2015 17:58:26 private-data.txt 1 drw- - Apr 22 2015 17:45:08 ceshi 2 -rw- 2243 Apr 22 2015 17:49:56 vrpcfg.cfg 3 drw- - Apr 22 2015 17:52:16 test /Directory for saving the configuration file. 31248 KB total (31088 KB free) 3. cd test /Access the test directory. 4. dir /Display files under the test directory. 17:58:35 2015/04/22 Directory of flash:/test/ 0 -rw- 1009 Apr 22 2015 17:52:47 configuration.zip 1 -rw- 991 Apr 22 2015 17:58:26 conf.zip /Saved configuration file. 31248 KB total (31088 KB free)

Configure the IP address, enable the NAT for the interface, and configure the default route.

If Huawei UltraPath is installed on the host, run the hot_add command to scan for disks. The existing services will not be affected. If the multipathing software is not installed, use the iSCSI network and restart the iSCSI service. If the Fibre Channel network is used, restart the server.

The operating system where the SMC2.0 is installed must be activated. The operating system of the SMC2.0 server must be activated upon initial login. The operating system must be activated in a timely manner. Microsoft does not provide post-sales services for operating systems that are not activated. 1. Choose Start > Computer, right-click, and choose Properties. 2. Click Change product key and enter the sequence number pasted on the CD-ROM of the operating system as promoted. 3. After the installation ID is generated, dial the post-sales service hotline of Microsoft to obtain the confirmation ID. 4. Enter the confirmation ID to activate the operating system. If the public network cannot be connected or other activation problems occur, dial the Microsoft post-sales service hotlines 8008203800 (by fixed line) and 4008203800 in China or dial the local Microsoft post-sales service hotlines in other regions. Keep the operating system sequence number in safe.