Sequence of powering on and powering off storage devices, switches, and hosts

0
Other related questions:
Methods used to power on or power off FusionAccess hardware devices
When you power on or power off FusionAccess hardware devices, you must follow the sequence specified in the product manual or the system may become faulty. First confirm your product version and then you can obtain its documentation in the following ways: 1. Refer to the "System Management" section in FusionCloud Desktop Solution Documentation. You can obtain this documentation at . 2. Contact the project coordinator via WeChat, email, or phone. 3. Post your request on Huawei's cloud computing forum (http://support.huawei.com/huaweiconnect/enterprise/forum-775.html). 4. Contact Huawei technical support by dialing the 400 hotline.

How can I power off the DP300?
To power off the DP300: Tap the power button in the lower right corner of the display twice or turn the power switch on the right panel to OFF.

Method used to change the power-on sequence if the power-on sequence of disk enclosures is not the physical connection sequence
Method used to change the power-on sequence if the power-on sequence of disk enclosures is not the physical connection sequence: FAQ-If the power-on sequence of disk enclosures is not the physical connection sequence, how can I change the power-on sequence

Powering off an E9000
Power off an E9000 as follows: 1. Power off the blades or switch modules in an E9000 chassis using the MM910 Web interface. For details, see http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900020.html. 2. Disconnect the E9000 power cable from the mains supply.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top