Storage device startup

0

If a storage device is powered on for the first time, it can be started only after you press the power button.
For details, see the related product manual at the following link:
http://support.huawei.com/enterprise/productsupport?lang=zh&pid=7941835&idAbsPath=7919749|7941815|7941835

Other related questions:
How to specify the configuration file for next startup on a WLAN device
Run the following commands in the user view on a WLAN device (except Fit APs) to specify the configuration file for next startup: - Run the startup system-software command in the user view to specify the system software for next startup. - Run the startup saved-configuration command in the user view to specify the configuration file for next startup. The following takes newbasicsoft.cc (system software for next startup) and vrpcfg.zip (configuration file) as an example: # Specify the system software to be loaded for the next startup. startup system-software newbasicsoft.cc # Specify the configuration file to be loaded for the next startup. startup saved-configuration vrpcfg.zip

IP address planning of a storage device
Service network ports on the same controller must reside in different network segments and also must reside in different network segments from the management network port of the controller.

Bonding of host ports on a storage device
1. Storage arrays support the 802.3ad bonding mode only. 2. If the ports on a storage device are bonded, the ports on the switch connected with the storage device must be aggregated and the ports on the server connected with the switch must be bonded. 3. Only the ports on the same controller can be bonded.

Configuration of power modules on a storage device
Among four power modules, either of the upper ones and either of the lower ones must be in place.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top