Retrieval of the login password for a controller enclosure

2

To retrieve the password for logging in to an S2200T, S2600T, S5500T, S5600T, S5800T, or S6800T controller enclosure, perform the following procedure:

If a read-only user or an administrator forgets the password, perform the following procedure:
1. Log in as user admin to the CLI on the controller enclosure.
2. Run resetuserpwd to initialize the password. After the initialization, the password is Admin@storage.
If an admin user forgets the password, contact technical support engineers for help.

Other related questions:
How can I retrieve the password for logging in to a controller enclosure when I forgot it?
To retrieve the password of a guest or an administrator, perform the following operations: 1. Log in to the CLI of the controller enclosure as user admin. 2. Run the resetuserpwd command to initialize the password. After the initialization, the password becomes Admin@storage. To retrieve the password of admin, please contact technical support engineers.

How do I add a neighboring GK on the SMC1.0?
In the node management module of the SMC1.0 web interface, select a GK (GK 1) and add another GK (GK2) as the neighboring GK of GK 1 in the route table. To establish the neighboring relationship, you also need to add GK 1 as the neighboring GK of GK2. Route prefix: indicates the number prefix routed to the neighboring GK. IP address: indicates the IP address of the peer GK. Use the default values of other parameters.

Login method if the account and password are forgotten for the USG6000 series
Upon the factory delivery, default administrator account admin and password Admin@123 are provided for the access to the USG6000 series in three modes: Telnet, web UI, and console port.

Retrieving the Telnet login password on the USG6000
Retrieve the Telnet login password on the USG6000 as follows: In this case, you need to log in to the device through the console port or web UI. The operations are as follows (with user1 being the user that has forgotten the password): 1. Change the password through the console port. system-view [USG6600]aaa [USG6600-aaa]manager-user admin [USG6600-aaa-manager-user-admin]password cipher password@123 //Indicates changing the password of the admin account to password@123. Retrieve the Telnet login password as follows: system-view [USG6600]user-interface vty 0 4 [USG6600-ui-vty0-4]authentication-mode password cipher huawei@123

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top