How to add FC SAN's license


refer to the 《Applying For License Key》of SAN switch's documentation

Other related questions:
Method used to enable the FC SAN startup on the HBA
Method used to enable the FC SAN startup on the HBA: FAQ-How can I enable the FC SAN startup on the HBA

Networking of OceanStor T Series unified storage
For the networking of OceanStor T Series unified storage, see Storage Journal -Typical iSCSI Networks.

Storage area network (SAN) is a high-speed network that incorporates storage devices, network connection devices, and interfaces. SAN is a storage network for data storage. Because SAN is isolated from the LAN service network, its storage data flow will not occupy service network bandwidth. In the SAN network, all data is transmitted in a high-speed and high-bandwidth network. SAN enables direct block-level storage access to physical hardware, improving storage performance and upgrade capabilities.

SAN definition
You can visit the following website to obtain SAN definition: FAQ-What is SAN

How to configure an FC interface on a CE series switch
Before configuring an FC interface, install an FC optical module. If the LINK indicator of a service interface is steady green, the interface is in Up state. # Switch 10GE1/0/1 to an FC interface. system-view [~HUAWEI] port mode fc 10ge 1/0/1 Warning: This operation will cause all the other configurations on the port to be lost. Continue? [Y/N]:y [*HUAWEI] commit # After configuring an FC interface, check the interface status. If the physical state and protocol state of the interface are both UP, the interface has been enabled. [~HUAWEI] display interface fc 1/0/1 FC1/0/1 current state : UP (ifindex: 144) Line protocol current state : UP ......

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top