One-click reprotection supported by the OceanStor ReplicationDirector

0

The OceanStor ReplicationDirector (mainstream version: V100R003C10) supports one-click reprotection.
The one-click reprotection function protects data at the disaster recovery site after successful device recovery at the production site, simplifying failback.

Other related questions:
One-click disaster recovery switchover supported by the OceanStor ReplicationDirector
The OceanStor ReplicationDirector (mainstream version: V100R003C10) supports one-click disaster recovery switchovers. The OceanStor ReplicationDirector supports two service switchover modes: planned migration and failover. The two modes significantly simplify disaster recovery switchovers, prevent misoperations in manual switchovers, and minimize recovery time objective (RTO). 1. One-click planned migration A planned migration is performed when data or applications at the production site need to be switched to the disaster recovery site due to a non-disaster cause, such as a power failure, an upgrade, or maintenance. 2. One-click failover A failover is performed when data or applications at the production site become unavailable due to a disaster or fault.

One-click disaster recovery test supported by the OceanStor ReplicationDirector
The OceanStor ReplicationDirector (mainstream version: V100R003C10) implements one-click disaster recovery tests based on recovery plans, without interrupting services at the production site. In addition, you can monitor the test process.

Introduction to OceanStor ReplicationDirector reprotection
If planned migration or fault recovery has been performed for a recovery plan, you can implement reprotection for the recovery plan. Reprotection protects data at the disaster recovery site once devices at the production site recover from disasters, simplifying failback. This operation can be performed only in the disaster recovery management system at the disaster recovery site.

Performing one-click information collection on the BMC
Server one-click information collection method: ? iMana: Run the ipmcset -t maintenance -d imtool command. For details, see http://support.huawei.com/ehedex/pages/DOC1000010818YEE0409N/18/DOC1000010818YEE0409N/18/resources/en/cbb/troubleshooting/it_troubleshooting_00035.html. ? iBMC: On the iBMC WebUI, choose Information > Summary > Shortcuts > One-Click Info Collection. For details, see http://support.huawei.com/ehedex/pages/DOC1000010818YEE0409N/18/DOC1000010818YEE0409N/18/resources/en/cbb/troubleshooting/it_troubleshooting_00036.html.

One-click information collection by using the MM910
One-click information collection method of the E9000 server: Log in to the MM910 WebUI, and choose System Management > SEL Information > SMM to collect information in one-click mode. For details, visit the following link: http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/cbb/troubleshooting/it_troubleshooting_00037.html

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top